Heating magnetic stirrer manufacturers direct

Heating magnetic agitator adopts NanoHeat nano-thermal energy technology, no mechanical heating components, dry burning, no electromagnetic field interference and harm, extremely rapid heating to 5℃, only 1 second, 4 minutes temperature reaches 400℃, microcrystalline ceramic plate and precision aluminum alloy shell perfect integration, beautiful fashion, corrosion resistance, easy cleaning.

Heating magnetic agitator has two major functions:

1. Stirring function: drive the magnetic agitator through the * magnet located under the working disc. * magnet can penetrate the working disc surface, and the magnet is fixed directly on the rotating shaft of the motor. The actual rotating speed of the instrument depends on the actual load and voltage. The fluctuation of the voltage within the permissible range and the change of the viscosity of the treated medium will cause the fluctuation of the rotating speed. The speed of the motor can be adjusted according to the requirements of the experiment.

2. Heating function: generally, heating magnetic agitator is equipped with heating device on the chassis. In addition, corresponding devices will be set to monitor the heating.

Precautions for heating magnetic agitator in use:

1. It shall not be used to stir explosive substances in dangerous environment or use instruments in underwater operations.

2. It shall be ensured that only personnel with relevant training can use the instrument.

3. Avoid the instrument power cord from touching the chassis.

4. Wear appropriate protective equipment according to the type of treatment medium.

5. The instrument should not be used to deal with explosive media indoors. The instrument should be placed on a table that is not flammable or fireproof.

6, pay attention to the magnetic field! Consider the influence of magnetic field on the surrounding environment, such as data storage and cardiac pacemaker.

Be careful of the heat! When the instrument is working, the dish surface temperature zui can reach several hundred degrees Celsius. Be careful to burn when touching the shell and dish surface of the instrument, and pay attention to the residual heat when the instrument is turned off.

8. When heated and cooled, a slight sound may be made as a result of the expansion of matter.